new... MultiCart Video Production Cart with top shelf, only $350
After years of waiting, the MultiCart Video Production location cart is back.
New and improved, now with 4 large pneumatic (rough terrain) tires and a
dual-length removable top shelf!
As far as we are concerned, these are the best buy in a versatile, location
cart for film, video, and audio production.
Frame telescopes 34"-52" in length. Pack it short for transit in a the
trunk of a compact car or give it to the Skycap (along with a $$$ tip) to travel
with your baggage as a "baggage cart". Load capacity: 500 lbs./32 cu.
ft. Weight: 36 lbs. Carries a lot, but weighs very little compared to
other handtruck carts.
32" foldable sides to stack loads high. After you arrive at your
location, extend the frame to full length and pack it high with
equipment cases. Unload, and then set up your top shelf either full length or
compact, depending on how much room you have in the set.
Two 10"x 3.0" pneumatic front wheels, and two 8"x 2.50" pneumatic
swivel caster rear wheels. Our older Multicarts only had two 5-inch plastic
castered rear wheels, which were fine on flat surfaces but difficult over
cables, bumps, and rough terrain. The new carts, with 4 substantial tires, roll
easily over basic obstacles.
Frames transforms into multiple configurations. You can really
get creative with your hauling: short frame, long frame; one side handle up, two
sides up, no sides up, etc. We've loaded an entire tradeshow booth
including tables & merchandise onto our cart and rolled it into the hall (some
convention center tradeshow Nazi's allow you one
do-it-yourself-load before extorting "union labor fees").
Removable Shelf Kit. We include one shelf kit with the Production
Cart. A second kit can be added as a mid-level shelf (for $99).
The shelf can be assembled as a long frame (51.25”x18”) or compacted frame
(29”x18”) shelf assembly. Shelf quickly detaches and breaks down into 2
pieces for small storage (30”x18”x2”). Tough powder-coated steel support tubes
with carpet-covered 1/2” plywood for durability. Kit also includes 2 pre-drilled
(for the shelf mounts) side handles that you install to replace the factory
standard (non-drilled) sides.
Easy to customize. We are exploring the idea of adding metal or
plastic pans to provide a larger worksurface than the standard 18-inch wide
shelves. We'll keep you informed of what we come up with!
Add some velcro ties and S-hooks to hold cables, headphones, etc. Fred
velcro's an army surplus tubular (ordinance) case to the side handle for
holstering a mic boompole.
Priced at a very reasonable $350 including the top shelf kit, these Production
Carts are an excellent value.
"Portable" and "Lightweight" are
relative terms, so please remember to budget $50 to $75
(approx) to cover UPS Ground Shipping.
| 
We are authorities in production sound recording
for video and filmmaking. We also have lots of accessories for videography; and
are dealers for Casablanca, AVIO, and Renommee
non-linear video editors; as well as turnkey AVID & AVID Liquid (aka
Pinnacle) editing solutions.
If you would like a copy of our
2005/2006 "cowboy cover" catalog (free, of course), please phone or
e-mail us. We are working on a new 2007 catalog, coming later this year.
