Mic Power Supplies
 Denecke PS-1 and PS-T Mic Power
Supplies
Denecke PS-1a mic pwr spply $135.00
Denecke supply provides true 48v Phantom powering. Operates from one 9-volt
battery, conveniently mounted on outside of box.
AC adapter for above $5.00
Denecke PS-2 dual pwr supply $150.00
48v to TWO mics.
Denecke PS-T mic pwr supply $135.00
Provides 12v T (A-B) powering.
PSC 48v Phantom to T $39.95
XLR barrel connector transforms 48v Phantom mic powering into 12v T (A-B)
power. Allows you to power older Senn 416 and 816 T-powered mics from mixing
panels that only offer 48v, such as Mackie and Behringer.
EQE Mark 3 lav pwr supply $119.00
 Our new power supply, named the Mark
3, utilizes the same TA5 connection as the Lectrosonics and new Audio Technica
ATW-101 wireless.
A version is also available with a Samson wireless style TA3 connector, for use
with mics intended for the UM1 or UM32 systems.
It allows you to use your high quality lavaliers hardwired to a standard XLR mic
cable during those situations when wireless is not viable (too much RF
interference).
The Mark 3 chassis box is completely metal for better RF shielding. The mic is
powered from an AA battery or from available 48v Phantom power. The Mark 3 uses
a high grade audio transformer, and also features a swtichable low-cut filter.
Metal belt clip.
Note: Microphone is not included. Specify normal TA5 or special Samson style
TA3.
Mark 3 Power Supply, only $119.00
In-Line XLR-XLR barrel Accessories
AT 8202 in-line pad $45.00
Switchable -10, -20, -30 dB attenuator. XLR in/out. Use to adapt XLR line
level output to XLR mic level input; can reduce line level outputs for use with
headphone.
NEW ATT-448 in-line pad $25.00
Switchable -20, -30, -40 dB attenuator. XLR in/out. Use to adapt XLR line
level output to XLR mic level input; can reduce line level outputs for use with
headphone.
Shure A15HP high pass $49.50
In-line XLR high pass filter.
Shure A15LA line to mic $55.00
In-line XLR 50dB attenuator.
Shure A15PRS phase switch $49.50
In-line XLR switchable phase reverser.
Wireless Mic Accessories
EQE Belt & Pouch Kit $27.00
 Cloth pouch for body pack transmitter,
and (3) elastic with Velcro belts (female thigh, small waist, large waist).
Belts can be joined for added length (very large waist).
Pouch can be used by itself for pinning to inside waistband of slacks, skirt,
athletic shorts, etc. Pouch has belt slot, which can be used over bra strap on
female back.
Single wireless pouch $12.95
 Small camcorder case which is perfect
fit for storing a wireless receiver on your waist, tripod, or camera mount.
Multi wireless pouch $17.95
Ideal for videographers with no place to mount receivers. Belt loop & shoulder
strap. Front compartment for storing transmitters.
Coiled stereo mini cable $7.99
Right angle coiled stereo mini plug to right angle coiled stereo mini plug.
CP8306 mini to XLR $17.00
Transformer balanced mono mini plug to XLR male. Connects mini jack receivers to
XLR input of camera or recorder.
Spare tie bar for MT350 lav $8.00
Foam windscreen for MT350 $7.00
Great to use on MT830 lavs.
Spare tie bar for MT830 lav $8.00
Mic Flag $27.95
 Official white plastic rectangular
mic flag fits over handle of any handheld mic. Atttach logo or computer art to
identify your organization or client. Includes two foam inserts to snug narrow
or wide handles.
Great for event videography!
Standard is 4 sided 2.5 by 2.5 inch white. Also available in black. Three
sided rectangular is also available, white or black.
Clapstick Slates
White Acrylic clapstick $49.95
 Pro quality write-on/wipe-off white
slate with oak clapstick. 11" x 9" Industry standard. Use dry-erase markers
only, such as MARKS-A-LOT DRY ERASE. Do not use Sanford Expo, it will stain.
Never clean with acetone; instead use denatured alcohol and avoid printed area.
Medium clapstick $34.95
Pro quality write-on/wipe-off white slate with oak clapstick. 8" x 7.5"
Dry Erase Marker $2.50
Dry Erase Marker (pack of 5) $10.00
Tripod mic desk stand $7.95
Weighted base desk stand $8.95
Mic Stand w. boom arm $39.95
Sennheiser SEMS-3000 adjusts from 32" to 60". Tripod style base folds up for
easy transport.
Shockmount handle combo $15.00
 Rubber handgrip can attach to any
shockmount. Handgrip removes to reveal table top tripod stand. Our own idea!
Mic Mounting Adapters
3/8 thread to camera shoe $15.00
 Heavy duty brass adapter for mounting
shockmounts solidly to camcorders. Rubber O ring and locking nut snug firmly to
shoe mount. Standard 3/8 stud with rubber washer attaches to standard
shockmounts. Works great with AT8415 universal shockmount!
5/8 thread to camera shoe $14.00
Similar to above but without 3/8 stud and washer.
3/8 male to 1/4-20 female $7.50
Attach mics to still photo tripods and trick mounting devices.
5/8 male to 3/8 female (donut) $4.00
Inserts into 5/8" (mic stand thread) shockmount to fit onto 3/8" boompole studs.
5/8 female to 3/8 male $4.00
Screws over standard 5/8" mic stand male thread to convert to 3/8 male fishpole
thread. Same as comes with AT8415 mount.
About Thread Sizes...
5/8-27, 3/8-16, 5/16-18, 1/4-20
The standard thread size for music mic stands is 5/8-27.
The standard thread size for fishpoles and most shockmounts (for film/TV) is
3/8-16. Note that this is also the standard thread size for professional camera
mounting.
The old Hollywood thread size for studio booms and fishpoles was 5/16-18. This
size is no longer used on currently manufactured equipment, but may still be
found on some older poles and shockmount handles.
The standard thread size for amateur video and 35mm still photography is 1/4-20.
To take advantage of the wide array of small clamps, tripods, and mounting
tricks available for amateur photographers, you should have a few 1/4-20 female
to 3/8 male adapters ($7.50).
MAH-5 Accessory Bracket clamps onto mic stands, soundcarts, etc.
$12.95
CM-01 Camera adapter for mic stands, $12.95 Base is
threaded to screw onto standard 5/8-27 mic stand threads. Camera platform is
standard 1/4-20 tripod thread. Intended only for small, lightweight cameras!
 MPC multi-position mic clamp
$13.95
 NRG tri-mount
$29.95
Slides onto camcorder shoe and provides 3 offset mounts for mic, lite, wireless.
NRG Grip2 bracket $39.95
Mounts to tripod socket of camera and provides 2 offset shoes for mic and lite.
 Video L bracket
$19.95
Mounts to bottom of camcorder and provides 2 offset shoes.
 Straight bracket
$15.00
Mounts to bottom of camcorder and extends 7 inches to any side with a shoe for
mic or lite.
 MSA-1 add-on stand clamp
$10.95
 MA-358 triple mic adapter
$12.95
 DMC-2 drum mount clamp
$10.95
CT-100 Cable Tester $34.95
 XLR, mono and TRS phone ( 1 /4 ,
1/8 , TT), RCA and MIDI. It shows which input pin is connected to which output
pin. Separate LED’s indicate proper shield connection and phantom power
presence. The CT100 also offers an installed cable test mode and a continuity
check plus a test tone generator.
Baby stud to 3/8-16 adapter $24.95
 Enables you to easily attach a
microphone shockmount onto any standard lighting stand, C-stand, or grip mount.
Fits over the industry standard 5/8 "baby stud" found on lighting support gear.
Studio POP screen $45.95
 SPS-K pop screen kit includes
gooseneck arm and mic stand clamp. Used to prevent breath pops caused by the
talent being too close to condenser microphones. Mesh pop filter acts as a
windscreen, while entire rig serves to maintain "distance".
Audio Technica UniTools
A very handy series of compact, in-line devices for microphone recording is
now available at Equipment Emporium.
Known as the UniTools, these units are inexpensive and can definitely be deemed
“problem solvers”.
The AT8681, UniMix, is a 2 into 1 mic combiner with balance control. $70.
Requires 48v Phantom.
The AT8682, UniGate, is a voice operated switch (gate) with adjustable
threshold. $75.
The AT8683, Unisteep, is a 80 Hz mic hi-pass filter. $50.
The AT8684, UniMute, is a mic attenuator with user definable switch position.
$70.
The AT8685, UniTrap, is a constant -Q mic notch filter with adjustable
frequency. $80.
The AT8686, UniLim, is a mic limiter with adjustable threshold. $75.
| 
We are authorities in production sound recording
for video and filmmaking. We also have lots of accessories for videography; and
are dealers for Casablanca, AVIO, and Renommee
non-linear video editors; as well as turnkey AVID & AVID Liquid (aka
Pinnacle) editing solutions.
If you would like a copy of our
2005/2006 "cowboy cover" catalog (free, of course), please phone or
e-mail us. We are working on a new 2007 catalog, coming later this year.
